Forcefield's armoured clothing for moto includes the Moto Pro and Moto Sport ranges for upper and lower body protection.
PRO JACKET X-V 1 & 2
Pro Jacket X-V 1 - front.jpg
Pro Jacket X-V 1 - rear.jpg

Features

  • Certification details below

  • New X Vents provide increased airflow

  • ‘Armour windows’ providing extra venting

  • Lighter weight, breathable BeCool™ base layer fabric

  • Lighter weight removable armour

  • Choice of Isolator CE1 or CE2 limb armour

  • Armour thickness from only 8mm (CE1) or 12mm (CE2)

  • Isolator 2 (limb armour) passes all 4 areas of the CE2 test (Ambient, Wet, Hot, Cold)

  • Redesigned CE2 back protector parts and now ‘free fitting’

  • Centre zip

  • Repeat Performance Technology (RPT)

  • DRI-M Technology (Dynamic, Reactive, Intelligent Material)

  • Available in sizes Small, Medium, Large, X-Large/XX-Large

Pro Jacket X-V 1
Product Code: FF3109
Sizes Available: Small, Medium, Large, X-Large/XX-Large
​CE: EN1621-2 Level 2 (Back). EN1621-1 Level 1 (Elbow & Shoulder).
Pro Jacket X-V 2 - front.jpg
Pro Jacket X-V 2 - rear.jpg
Pro Jacket X-V 2
Product Code: FF3129
Sizes Available: Small, Medium, Large, X-Large/XX-Large
​CE: EN1621-2 Level 2 (Back). EN1621-1 Level 2 (Elbow & Shoulder).
The Pro Jacket X-V features a CE2 ‘free fitting’ new back insert and a choice of Isolator CE1 limb armour (X-V 1) or Isolator CE2 limb armour (X-V 2).
Both versions have a super lightweight construction and a centre zip.

New production techniques have resulted in a super strong open mesh (X Vents) that is even more breathable, yet super soft and strong. This runs through the high heat areas, and also provides ‘armour windows’, not only looking good, but also providing extra breathability and lightness.

The CE2 back armour parts have been re-designed and now provide unrivalled ‘free fitting’ flexibility. This is achieved by a unique cutting pattern throughout the layers of Forcefield’s own DRI-M technology (Dynamic Reactive Intelligent Materials).
The new Pro clothing range includes: Pro Shirt X-V 1 & 2, Pro Jacket X-V 1 & 2, Pro Vest X-V 1 & 2, Pro Tube 1 & 2, Pro Pants 1 & 2, Pro Shorts 1 & 2.
PRO SHIRT X-V 1 & 2
Pro Shirt X-V 1 - front.jpg
Pro Shirt X-V 1 - rear.jpg
Pro Shirt X-V 1
Product Code: FF3036
Sizes Available: Small, Medium, Large, X-Large/XX-Large
​CE: EN1621-2 Level 2 (Back). SATRA M28: 2007 Level 2 (Chest). EN1621-1 Level 1 (Elbow & Shoulder)
Pro Shirt X-V 2 - front.jpg
Pro Shirt X-V 2 - rear.jpg
Pro Shirt X-V 2
Product Code: FF3046
Sizes Available: Small, Medium, Large, X-Large/XX-Large
​CE: EN1621-2 Level 2 (Back). SATRA M28: 2007 Level 2 (Chest). EN1621-1 Level 2 (Elbow & Shoulder)

Features

  • Certification details below

  • New X Vents provide increased airflow

  • ‘Armour windows’ providing extra venting

  • Lighter weight, breathable BeCool™ base layer fabric

  • Lighter weight removable armour

  • Choice of Isolator CE1 or CE2 limb armour

  • Armour thickness from only 8mm (CE1) or 12mm (CE2)

  • Isolator 2 (limb armour) passes all 4 areas of the CE2 test (Ambient, Wet, Hot, Cold)

  • Redesigned chest and back protector parts (CE2) and now ‘free fitting’

  • Repeat Performance Technology (RPT)

  • DRI-M Technology (Dynamic, Reactive, Intelligent Material)

  • Available in sizes Small, Medium, Large, X-Large/XX-Large
     

The Forcefield Pro Shirt X-V features CE Level 2 back and chest protectors, with a choice of Isolator CE1 (X-V 1) or Isolator CE2 armour (X-V 2) in the arms and shoulders.

New production techniques have resulted in a super strong open mesh (X Vents) that is even more breathable, yet super soft and strong. This runs through the high heat areas and also provides ‘armour windows’, not only looking good, but also providing extra breathability and lightness.

The CE2 back and chest armour parts have been re-designed and now provide unrivalled ‘free fitting’ flexibility. This is achieved by a unique cutting pattern throughout the layers of Forcefield’s own DRI-M technology (Dynamic Reactive Intelligent Materials).


The new Pro clothing range includes: Pro Shirt X-V 1 & 2, Pro Jacket X-V 1 & 2, Pro Vest X-V 1 & 2, Pro Tube 1 & 2, Pro Pants 1 & 2, Pro Shorts 1 & 2.
PRO VEST X-V 1 & 2
Pro Vest X-V 1 - front.jpg
Pro Vest X-V 1 - rear.jpg

Features

  • Certified to EN1621-2 Level 2

  • New X Vents provide increased airflow

  • ‘Armour windows’ providing extra venting

  • Lighter weight, breathable BeCool™ base layer fabric

  • Lighter weight removable armour

  • Redesigned back protector and now ‘free fitting’

  • Centre zip

  • Repeat Performance Technology (RPT)

  • DRI-M Technology (Dynamic, Reactive, Intelligent Material)

  • Available in sizes Small, Medium, Large, X-Large

Product Code: FF3049 (X-V 1), FF3059 (X-V 2 with chest pads and waistband)
Sizes Available: Small, Medium, Large, X-Large
​CE: EN1621-2 Level 2 (Back)
The Pro Vest X-V offers full CE2 back protection for those who require back protection built into a garment. It features a super lightweight construction and has a centre zip. The Pro Vest X-V 2 comes complete with chest pads and an adjustable waistband.

New production techniques have resulted in a super strong open mesh (X Vents) that is even more breathable, yet super soft and strong. This runs through the high heat areas, and also provides ‘armour windows’, not only looking good, but also providing extra breathability and lightness.

The CE2 back armour parts have been re-designed and now provide unrivalled ‘free fitting’ flexibility. This is achieved by a unique cutting pattern throughout the layers of Forcefield’s own DRI-M technology (Dynamic Reactive Intelligent Materials).

The new Pro clothing range includes: Pro Shirt X-V 1 & 2, Pro Jacket X-V 1 & 2, Pro Vest X-V 1 & 2, Pro Tube 1 & 2, Pro Pants 1 & 2, Pro Shorts 1 & 2.
PRO PANTS X-V 1 & 2
Pro Pant 1 - front side.jpg
Pro Pant 1 - rear side.jpg
Pro Pants X-V 1
Product Code: FF30441
Sizes Available: Small, Medium, Large, X-Large/XX-Large
​CE: EN1621-1 Level 1 (Hip, Knee & Buttock/Coccyx)
Pro Pant 2 - front.jpg
Pro Pant 2 - rear side.jpg

Features

  • Certification details below

  • ‘Armour windows’ providing extra venting

  • Lighter weight, breathable BeCool™ base layer fabric

  • Lighter weight removable armour

  • Isolator CE1 (X-V 1) or CE2 (X-V 2) armour

  • Armour thickness from only 8mm (CE1) or 12mm (CE2)

  • Isolator 2 (limb armour) passes all 4 areas of the CE2 test (Ambient, Wet, Hot, Cold)

  • Draw cord waistband

  • Repeat Performance Technology (RPT)

  • DRI-M Technology (Dynamic, Reactive, Intelligent Material)

  • Available in sizes Small, Medium, Large, X-Large/XX-Large

Pro Pants X-V 2
Product Code: FF30442
Sizes Available: Small, Medium, Large, X-Large/XX-Large
​CE: EN1621-1 Level 2 (Hip, Knee & Buttock/Coccyx)
Forcefield Pro Pants X-V are the ultimate protective sports pants with Isolator 1 (X-V 1) or Isolator 2 (X-V 2) Hip, Knee and Buttock/Coccyx Pads.

The Pro Pants X-V are constructed using the most breathable BeCool™ base layer fabrics. Ergonomically-shaped specific Isolator armour pieces have been designed to provide maximum protection, while offering huge unrestricted movement and breathability. The 5-piece armour set covers hips, knees and buttocks/coccyx, and is removable quickly and easily.

New production techniques have resulted in a super strong open mesh that is even more breathable, yet super soft and strong. We use this in the Pro Pants X-V 1 to create ‘armour windows’, not only looking good, but also providing extra breathability and lightness. The Pro Pants X-V have DRI-M technology (Dynamic, Reactive, Intelligent Material) fitted throughout.
The new Pro clothing range includes: Pro Shirt X-V 1 & 2, Pro Jacket X-V 1 & 2, Pro Vest X-V 1 & 2, Pro Tube 1 & 2, Pro Pants 1 & 2, Pro Shorts 1 & 2.
PRO SHORTS X-V 1 & 2
Pro Shorts 1 - front.jpg
Pro Shorts 1 - rear.jpg

Features

  • Certification details below

  • ‘Armour windows’ providing extra venting

  • Lighter weight, breathable BeCool™ base layer fabric

  • Lighter weight removable armour

  • Isolator CE1 (X-V 1) or CE2 (X-V 2) armour

  • Armour thickness from only 8mm (CE1) or 12mm (CE2)

  • Isolator 2 (limb armour) passes all 4 areas of the CE2 test (Ambient, Wet, Hot, Cold)

  • Draw cord waistband

  • Soft silicone leg gripper

  • Repeat Performance Technology (RPT)

  • DRI-M Technology (Dynamic, Reactive, Intelligent Material)

  • Available in sizes Small, Medium, Large, X-Large, XX-Large

Pro Shorts X-V 1
Product Code: FF30401
Sizes Available: Small, Medium, Large, X-Large, XX-Large
​CE: EN1621-1 Level 1 (Hip & Buttock/Coccyx)
Pro Shorts 2 - front.jpg
Pro Shorts 2 - rear.jpg
Pro Shorts X-V 2
Product Code: FF30402
Sizes Available: Small, Medium, Large, X-Large/XX-Large
​CE: EN1621-1 Level 2 (Hip & Buttock/Coccyx)
Forcefield Pro Shorts X-V are constructed using the most breathable BeCool™ base layer fabrics. Ergonomically-shaped specific Isolator 1 (X-V 1) or Isolator 2  (X-V 2) armour pieces have been designed to provide maximum protection, while offering huge unrestricted movement and breathability. The 3-piece armour set covers hips and buttocks/coccyx, and is removable quickly and easily.

New production techniques have resulted in a super strong open mesh that is even more breathable, yet super soft and strong. We use this in the Pro Shorts X-V to create ‘armour windows’, not only looking good, but also providing extra breathability and lightness.

The ultimate protective sports shorts with DRI-M technology (Dynamic, Reactive, Intelligent Material).

 
The new Pro clothing range includes: Pro Shirt X-V 1 & 2, Pro Jacket X-V 1 & 2, Pro Vest X-V 1 & 2, Pro Tube 1 & 2, Pro Pants 1 & 2, Pro Shorts 1 & 2.
PRO TUBE X-V 1 & 2
Pro Tube 1 - 1 front.jpg
Pro Tube 1 - 2 side.JPG
Pro Tube 2 - 1 front.jpg
Pro Tube 2 - 2 side.jpg

Features

  • Certification details below

  • New X Vents provide increased airflow

  • ‘Armour windows’ providing extra venting

  • Lighter weight, breathable, high performance base layer fabric

  • Lighter weight removable armour

  • Isolator CE1 (X-V 1) or CE2 (X-V 2) armour

  • Armour thickness from only 8mm (CE1) or 12mm (CE2)

  • Isolator 2 (limb armour) passes all 4 areas of the CE2 test (Ambient, Wet, Hot, Cold)

  • Removable dual elastic straps

  • Repeat Performance Technology (RPT)

  • DRI-M technology (Dynamic, Reactive, Intelligent Material)

  • Available in sizes Small, Medium, Large

Pro Tube X-V 1
Product Code: FF3114
Sizes Available: Small, Medium, Large
​CE: EN1621-1 Level 1 (Elbow or Knee)
Pro Tube X-V 2
Product Code: FF3124
Sizes Available: Small, Medium, Large
​CE: EN1621-1 Level 2 (Elbow or Knee)
The Forcefield Pro Tube X-V with Isolator 1 or Isolator 2 elbow/knee armour. The redesigned Pro Tube X-V is a lightweight, breathable elbow or knee protector in a tube style sleeve. Super soft yet strong construction using a high performance base layer fabric results in a comfortable product that you cannot tell you are wearing. Now with increased venting on the front face, and softer at the rear. The armour can be removed quickly and easily, allowing the tubes to be washed for prolonged freshness.

The ultimate protective limb tubes with DRI-M technology (Dynamic, Reactive, Intelligent Material).

 
The new Pro clothing range includes: Pro Shirt X-V 1 & 2, Pro Jacket X-V 1 & 2, Pro Vest X-V 1 & 2, Pro Tube 1 & 2, Pro Pants 1 & 2, Pro Shorts 1 & 2.
SPORT JACKET 1 & 2
Sport Jacket - Front Side.jpg
Sport Jacket - Rear Side.jpg

Features

  • Certification details below

  • Secure armour fit

  • Ideal for use under outer jackets

  • Lightweight, high performance compression material

  • Breathable

  • Isolator CE1 or Isolator CE2 armour

  • Armour thickness from only 8mm (CE1) or 12mm (CE2)

  • Isolator 2 passes all 4 areas of the CE2 test (Ambient, Wet, Hot, Cold)

  • CE2 back armour fitted as standard

  • Centre zip

  • Repeat Performance Technology

  • Use for on and off road

  • DRI-M Technology (Dynamic, Reactive, Intelligent Material)

 
The Sport Jacket is easy to wear, fast to get into and out of, with CE2 back protection fitted as standard. Sport Jacket 1 has CE1 shoulder and elbow armour, and Sport Jacket 2 has CE2 shoulder and elbow armour. This is a great way to protect the upper body to a higher level than armour fitted as standard into jackets – and it’s far more comfortable.

The perfect base layer armoured jacket for road, touring and commuting.

 

The new Sport clothing range includes: Sport Jacket 1 & 2, Sport Shirt 1 & 2, Sport Pants 1 & 2, Sport Tube 1 & 2.

 

Product Code: FF7200 (Sport Jacket 1), FF7210 (Sport Jacket 2), FF72000 (No Armour)
Sizes Available: X-Small, Small, Medium, Large, X-Large
​CE: Sport Jacket 1: EN1621-2 Level 2 (Back). EN1621-1 Level 1 (Elbow & Shoulder).
Sport Jacket 2: EN1621-2 Level 2 (Back). EN1621-1 Level 2 (Elbow & Shoulder).
SPORT SHIRT 1 & 2
Sport Shirt - Front Side.jpg
Sport Shirt - Rear Side 1.jpg

Features

  • Certification details below

  • Secure armour fit

  • Ideal for use under outer jackets

  • Lightweight, high performance compression material

  • Breathable

  • Isolator CE1 or Isolator 2 limb armour

  • Armour thickness from only 8mm (CE1) or 12mm (CE2)

  • Isolator 2 passes all 4 areas of the CE2 test (Ambient, Wet, Hot, Cold)

  • CE2 layered back and chest armour

  • Repeat Performance Technology

  • Side entry zip

  • Use for on and off road

  • DRI-M Technology (Dynamic, Reactive, Intelligent Material)

The Forcefield Sport Shirt is easy to wear, with protection covering the back (CE2) and chest (CE2). Sport Shirt 1 has CE1 armour at the shoulder and elbow, and Sport Shirt 2 has CE2 armour at the shoulder and elbow. This is a great way to protect the upper body to a higher level than armour fitted as standard into jackets – and it’s far more comfortable.

A versatile ‘do it all’ product for all types of motorcycle riders.
The new Sport clothing range includes: Sport Jacket 1 & 2, Sport Shirt 1 & 2, Sport Pants 1 & 2, Sport Tube 1 & 2.
Product Code: FF7100 (Sport Shirt 1), FF7110 (Sport Shirt 2), FF71000 (No Armour)
Sizes Available: X-Small, Small, Medium, Large, X-Large
​CE: Sport Shirt 1: EN1621-2 Level 2 (Back). SATRA M28: 2007 Level 2 (Chest). EN1621-1 Level 1 (Elbow & Shoulder).
Sport Shirt 2: EN1621-2 Level 2 (Back). SATRA M28: 2007 Level 2 (Chest). EN1621-1 Level 2 (Elbow & Shoulder).
SPORT PANTS 1 & 2
Sport Pants - Front.jpg
Sport Pants - Rear.jpg

Features

  • Certification details below

  • Secure armour fit

  • Ideal for use under outer pants/Kevlar jeans

  • Lightweight, high performance compression material

  • Breathable

  • New ergonomic shaped armour hips and buttocks

  • Isolator CE1 or Isolator CE2 armour

  • Armour thickness from only 8mm (CE1) or 12mm (CE2)

  • Isolator 2 passes all 4 areas of the CE2 test (Ambient, Wet, Hot, Cold)

  • Repeat Performance Technology

  • Use for on and off road

  • DRI-M Technology (Dynamic, Reactive, Intelligent Material)

Easy to wear, with protection covering the hips, knees and buttocks, the Sport Pants is a great way to protect the lower body to a higher level than armour fitted as standard into jeans and pants - and it’s far more comfortable. The Sport Pants have a slim profile due to the ergonomically-designed CE1 (Sport Pants 1) or CE2 (Sport Pants 2) armour parts for the hips, knees and buttocks.

The perfect base layer armoured pant for touring and commuting. Great with Kevlar jeans.
The new Sport clothing range includes: Sport Jacket 1 & 2, Sport Shirt 1 & 2, Sport Pants 1 & 2, Sport Tube 1 & 2.
Product Code: FF7300 (Sport Pants 1), FF7310 (Sport Pants 2), FF73000 (No Armour)
Sizes Available: X-Small, Small, Medium, Large, X-Large
​CE: Sport Pants 1: EN1621-1 Level 1 (Hip, Elbow/Knee). Sport Pants 2: EN1621-1 Level 2 (Hip, Elbow/Knee)
SPORT TUBE 1 & 2
Sport Tube - Leg 1.jpg
Sport Tube - Arm 2.JPG

Features

  • Certification details below

  • Lightweight, high performance compression material

  • Ideal armour fit and body placement

  • Lightweight, removable armour

  • Isolator CE1 or Isolator CE2 armour

  • Armour thickness from only 8mm (CE1) or 12mm (CE2)

  • Repeat Performance Technology

  • Use for on and off road

  • DRI-M Technology (Dynamic, Reactive, Intelligent Material)

Easy to wear and slide on and off, with protection covering the elbows and knees, the Sport Tube is a great way of protecting limbs to a higher level than armour fitted as standard into clothing – and it’s far more comfortable. Sport Tube 1 has CE1 armour and Sport Tube 2 has CE2 armour.

The Sport Tube has a compression fit and a slim profile - the perfect armoured tube for touring and commuting. Great with Kevlar jeans.
 
The new Sport clothing range includes: Sport Jacket 1 & 2, Sport Shirt 1 & 2, Sport Pants 1 & 2, Sport Tube 1 & 2.
Product Code: FF7300 (Sport Pants 1), FF7310 (Sport Pants 2), FF73000 (No Armour)
Sizes Available: X-Small, Small, Medium, Large, X-Large
​CE: Sport Pants 1: EN1621-1 Level 1 (Hip, Elbow/Knee). Sport Pants 2: EN1621-1 Level 2 (Hip, Elbow/Knee)
SPORT SUIT (CE1 & CE2)
Sport Suit 6x4.jpg
Sport Suit - Detail - 6x4.jpg

Features

  • Certification details below

  • Modular – removable armour

  • Choice of Isolator CE1 or CE2 limb armour. (Back protection is always CE2 as standard)

  • The safest way to use motorcycle protection. Close fitting, less likely to move in an impact, in comparison with armour positioned in the outer garment

  • One-piece suit, improves the comfort of wearing leathers and textile outer garments

  • Two way zip

  • Makes getting in and out of leathers easier

  • Breathable

  • Wicking

  • Easy to wash and keep fresh, keeping outer wear fresher for longer

  • Secure armour fit

  • Lightweight, high performance base layer material

  • Isolator 2 passes all 4 areas of the CE2 test (Ambient, Wet, Hot, Cold)

  • Isolator 1 armour is from only 8mm thick

  • Repeat Performance Technology

  • Use for on and off road

  • DRI-M Technology (Dynamic, Reactive, Intelligent Material)

One piece ‘sport’ base layer armoured under-suit. Nine armour pockets for shoulder, elbow, hip, knee and back armour. Ideal for use under leather as a racers/track garment. Dual use - will be just as usable and practical as an adventure base layer garment.

Supremely comfortable, classy and breathable, it utilises compression fit technology and is equipped with a CE2 ‘Freefit’ back insert.

As with our other armoured clothing, the wearer can choose whether it’s fitted with Isolator CE1 or CE2 limb armour. This gives greater flexibility in terms of price, and armour characteristics. For example, a rider who rides predominantly off road in hot conditions, may well chose the CE1 limb armour as it’s thinner and lighter and offers greater breathability. Fast track or race use, CE2 is the preferred option.

The fabric used is a high performance, breathable base layer, specifically designed for use under regular motorcycle clothing, whether it’s casual, textile or leather.

The Sport Suit is suitable for many types of motorcycle riders, from professional racers, to track day enthusiasts to adventure tour and travel riders.

You can find only CE2 back protection within the Sport Suit. (A CE1 version is available as an aftermarket part).

Armour worn in base layer compression fit clothing is the safest, most comfortable and practical means of protection.

All Forcefield armour within the range benefits from DRI-M technology (Dynamic, Reactive, Intelligent Material).
 
Product Codes: Sport Suit CE1 (FF9010). Sport Suit CE2 (FF9011). Sport Suit - No Armour (FF90100)
Sizes Available: X-Small/Small, Medium/Large, X-Large/XX-Large
​CE: Sport Suit CE1: EN1621-2:2014 FB Level 1. EN1621-1:2012 Type B Level 1
Sport Suit CE2: EN1621-2:2014 FB Level 2. EN1621-1:2012 Type B Level 2
ABRASION RESISTANT (AR) KNEE PROTECTOR (CE1 & CE2)

Features

  • Certification details below

  • Abrasion resistant points where needed most. High tensile strength abrasion resistant fabric with internal coating specifically located on knee face and on outer side of the knee

  • Wrap-around - easy fit and removal

  • Simple up and over elasticated strap system

  • Elasticated adjustable external straps both top and bottom for extra security with silicone grip

  • TPR housing for smooth feed of elasticated straps with tab ends for easy adjustment

  • Option to wear over the top of outer wear

  • Additional ‘padding’ around the sides

  • Dual extra pads on outside of knee with single pad on the inner side

  • Open cut out behind knee - large vent

  • Soft backing fabric for comfort

  • Choice of Isolator CE1 or CE2 limb armour

  • Breathable

  • Easy to wash and keep fresh

  • Secure armour fit

  • Isolator 2 passes all 4 areas of the CE2 test (Ambient, Wet, Hot, Cold)

  • Isolator 1 armour is from only 8mm thick

  • Repeat Performance Technology

  • Use for on and off road

  • DRI-M Technology (Dynamic, Reactive, Intelligent Material)

Easy to fit with the option to be worn externally or next to the skin. Super comfortable, great for use over jeans, commuter use or general riding. Also suitable for off road and travel use. Unique wrap around fixing.

A high quality knee protector that can be worn over the top of outer wear, or next to the skin. Innovative design and a clever fastening system with lots of adjustability. Silicone gripper positioned on the inside keep the protector anchored in place - exactly where it needs to be. A clever abrasion resistant fabric covers the forward face of the protector and outer side resulting in a tough exterior where needed most. Additional side pads help protect the knee from side knocks. An open area at the reverse results in great breathability and added flexibility with no bunching of material.

A strong ‘do it all’ knee protector with clever features and lots of adjustability. High protection levels provided by the Isolator armour, and incredible comfort.

As with our other armoured products, the wearer can choose whether it’s fitted with Isolator CE1 or CE2 limb armour. This gives greater flexibility in terms of price, and armour characteristics. For example, a rider who rides predominantly off road in hot conditions, may well chose the CE1 limb armour as it’s thinner and lighter and offers greater breathability. If its road or race, touring, commuting or extreme enduro use, CE2 might be the preferred option.
Product Codes: A.R Knee CE1 (FF8110). A.R Knee CE2 (FF8111).
Sizes Available: One Size
​CE: A.R Knee CE1: EN1621-1:2012 Type B Level 1. A.R Knee CE2: EN1621-1:2012 Type B Level 2.
CONTAKT SHORTS
Contakt front.jpg
Contakt back.jpg

Features

  • Certification details below

  • 8-panel design

  • 9mm FLHex armour

  • 3D CoolMax® silver anti-bacterial chamois pad

  • Heat activated body moulding

  • Removable armour

  • High quality silicone leg grippers

  • Dual use – liner or outer wear

  • RPT (Repeat Performance Technology)

  • Ergonomically designed

  • Machine washable (with armour removed)

The Forcefield Contakt Shorts are a specifically designed 8 panel riding short that features both CE approved armour and a 3D Coolmax® Silver anti-bacterial chamois pad for maximum protection and comfort.

Fitted with the revolutionary new FLHex Armour from the Nitrex Evo® family the removable fully CE approved armour is just 9mm and boasts incredible multi directional flexibility and a super malleable compound which allows the armour to contour around the riders shape and flow with the movement of the body resulting in the most dynamic and comfortable armoured riding shorts available today.

The silky soft integrated 3D CoolMax® Silver anti-bacterial chamois pad is fitted for both comfort and hygiene in the saddle. The seamless construction and 4–way stretch give unparalleled comfort whilst the Silver based bacteriostatic additive manages moisture and neutralizes odour causing bacteria.

Designed to be so comfortable you will forget you are wearing them, the Contakt Shorts are ideal whether you are riding all day in the wilderness going for a fast blast around your local trail centre or a tackling a short intense DH race. The Contakt Shorts offer the ultimate in protection, comfort and performance.

 
Product Code: FF3010, FF3010-0 (No Armour)
Sizes Available: X-Small, Small, Medium, Large, X-Large
CE: Hip Certified to EN1621-1:2012 Impact & Coverage (M/L/XL).
XS/S meets impact requirement but because of its ergonomic design falls outside of Type A coverage.

© Forcefield Body Armour is a division of Davies Odell Ltd

Rushden, Northamptonshire, United Kingdom

MIB Horizontal - Left - South East.jpg