Forcefield's body armour range includes: back protectors, chest and rib protectors, upper body protection systems,
back inserts and upgrade armour.
PRO SUB 4K BACK PROTECTOR
ProSub4 K 1.jpg
ProSub4 K 7.jpg

Features

  • Certified to EN1621-2 Level 2

  • The world's first motorcycle back protector to transmit less than 4kN when subjected to the CE test EN1621-2

  • Now with Kevlar

  • Removable & washable outer cover

  • Heat activated 3D body moulding

  • RPT (Repeat Performance Technology)

  • Comfortable and non restrictive

  • Flexible

  • Breathable

  • Moulds to body shape

  • Adjustable waist and shoulder straps

  • Sizes available: S, M, L, XL

 
Back in 2009, the Forcefield Pro Sub 4 was launched. The first motorcycle back protector to pass the CE 2 test at below 4kN*. The official test pass was 3.38kN. A world first, and industry award winner. Even today the Pro Sub 4 still holds the accolade of being the most protective motorcycle back protector available. That is some record!

The NEW Pro Sub 4K still passes the CE 2 test at this amazingly high protection level; it has the Forcefield DRI-M Technology (Dynamic, Reactive, Intelligent Materials) integrated throughout. It fits close to the body, 3D custom moulding to the wearer’s shape. It has the ability to withstand multiple impacts, and contains hundreds of breathable vent holes throughout to help maintain body temperature. The multi-layered technical materials are now held together with Kevlar thread for added security and strength. These sit in a refreshed, removable cover that can be washed and kept clean.

The Pro Sub 4K has been engineered to offer the maximum in terms of safety and protection, yet is super comfortable and extremely durable.

The reason the original Pro Sub 4 has stood the test of time is the versatility that this product gives. It can be used on road, on track, touring, super moto and adventure. Still the same industry leading great product, now stronger, and with a new, fresh appearance.

*4kN is considered by experts to be the maximum amount of transmitted energy that should be subjected to a human to prevent severe back and rib trauma.

 
Product Code: FF1024
Sizes Available: Small, Medium, Large, X-Large
​CE: EN1621-2 Level 2 (Back)
PRO L2K DYNAMIC BACK PROTECTOR
ProL2KEvo Dynam 1.jpg
ProL2KEvo Dynam 4.jpg

Features

  • Certified to EN1621-2 Level 2

  • Kevlar® stitching

  • Heat activated 3D body moulding

  • RPT (Repeat Performance Technology)

  • Soft, comfortable and non-restrictive

  • Flexible layering system

  • Breathable

  • Lightweight

  • High energy absorption

  • Adjustable 3 point waist fastening and shoulder straps

 
The Pro L2K Dynamic is the latest in a successful line of ground-breaking variations of the Pro L2 back protector, spanning 14 years. This CE2 back protector is now built with a softer and more pliable moulded first protection layer, so it 3D moulds and shapes faster, giving more comfort without compromising on safety.

The Pro L2K Dynamic passes the CE2 test at an amazingly high protection level, with Forcefield DRI-M Technology (Dynamic, Reactive, Intelligent Materials) integrated throughout. It fits close to the body, 3D custom moulding to the wearer’s shape almost immediately. It has the ability to withstand multiple impacts, and contains hundreds of breathable vent holes throughout to help maintain body temperature. The multi-layered technical materials are held together with Kevlar® thread for added security and strength.

The Pro L2K Dynamic has been engineered to offer the maximum in terms of safety and protection, and is super comfortable and extremely durable.

It stands the test of time. The versatility that this product gives is huge; it can be used on road, on track, touring, commuting, super-moto, and adventure.

 
Product Code: FF1042
Sizes Available: Men’s: Small, Medium, Large. Ladies: Medium (waist band position 50mm higher)
​CE: EN1621-2 Level 2 (Back)
FREELITE BACK PROTECTOR
Freelite Back Protector - flat.jpg
Freelite Back Protector - rear side.JPG

Features

  • Certified to EN1621-2 Level 2

  • All new back protector

  • Super lightweight

  • ‘Free fitting’ CE2 armour layering system

  • Specially cut to maximise flexibility

  • Non restrictive and breathable construction

  • Height adjustable, 3-point fastening waistband

  • Heat activated 3D body moulding

  • Repeat Performance Technology (RPT)

  • DRI-M technology (Dynamic, Reactive, Intelligent Material)

  • Available in sizes Small, Medium, Large

 
The FreeLite is a new addition to the Forcefield back protector range.

The FreeLite back protector takes comfort to the next level. While still offering CE Level 2 performance and Repeat Performance Technology (RPT), the new ‘free fitting’ back protector offers even more breathability, flexibility and at minimal weight.

Using the very latest cutting techniques and clever design the ‘free fitting’ armour shapes to the body perfectly, offering huge flexibility and no restriction when moving around on the motorcycle.

Secure adjustable waist band and elastic shoulder straps keep the FreeLite in place.
Product Code: FF1054
Sizes Available: Small, Medium, Large
​CE: EN1621-2 Level 2 (Back)
EX-K HARNESS ADVENTURE
EX-K-Harn-Adv-F.jpg
EX-K-Harn-Adv-B.jpg

Features

  • Certification details below

  • Unique ‘open’ system

  • Heat activated body moulding

  • Neck brace compatible

  • Reinforced with Kevlar thread

  • 3 modular options

  • Vented for improved breathability

  • Improved ergonomics and ease of use

  • RPT (Repeat Performance Technology)

  • Fully adjustable

  • 3D moulding

  • Soft, flexible and comfortable

  • Available in 3 sizes

 
The Ex-K Harness is a complete CE Level 2 upper body protection system.

Designed for extreme action the all new EX-K Harness is reinforced with Kevlar® thread for added strength and durability and features an open design system and multiple adjustment points for optimum flexibility and comfort. An easy to use central front zip, neck brace location point and class leading CE Level 2 back, chest, shoulder and elbow armour combine to create the ultimate in upper body protection.

The EX-K Harness is made with the high energy absorbing material Nitrex Evo® which is soft, flexible and comfortable to wear and 3D moulds to the body shape in use as well as offering RPT (Repeat Performance Technology) for continued and consistent protection even after multiple impacts.

It is available in three modular options:
  • Adventure (back, chest, shoulders and elbows)
  • Flite+ (back, chest and shoulders)
  • Flite (back and chest only)

Light in weight, easy to fit, comfortable to use and fully CE approved to Level 2 (the highest protection level available), the Ex-K Harness truly is the best of the best!
Product Code: FF20132
Sizes Available: Small, Medium, Large
​CE: EN1621-2 Level 2 (Back). SATRA M28:2007 [impact], prEN1621-3:2013 (2103-10) [sizing & ergonomics] (Chest). EN1621-1 Level 2 (Shoulders & Elbows).
EX-K HARNESS FLITE+
EX-K-Harn-Fliteplus-F.jpg
EX-K-Harn-Fliteplus-B.jpg

Features

  • Certification details below

  • Unique ‘open’ system

  • Heat activated body moulding

  • Neck brace compatible

  • Reinforced with Kevlar thread

  • 3 modular options

  • Vented for improved breathability

  • Improved ergonomics and ease of use

  • RPT (Repeat Performance Technology)

  • Fully adjustable

  • 3D moulding

  • Soft, flexible and comfortable

  • Available in 3 sizes

The Ex-K Harness Flite+ offers CE Level 2 protection to the back, chest and shoulders.
Product Code: FF20122
Sizes Available: Small, Medium, Large
​CE: EN1621-2 Level 2 (Back). SATRA M28:2007 [impact], prEN1621-3:2013 (2103-10) [sizing & ergonomics] (Chest). EN1621-1 Level 2 (Shoulders).
EX-K HARNESS FLITE
EX-K-Harn-Flite-F.jpg
EX-K-Harn-Flite-B.jpg

Features

  • Certification details below

  • Unique ‘open’ system

  • Heat activated body moulding

  • Neck brace compatible

  • Reinforced with Kevlar thread

  • 3 modular options

  • Vented for improved breathability

  • Improved ergonomics and ease of use

  • RPT (Repeat Performance Technology)

  • Fully adjustable

  • 3D moulding

  • Soft, flexible and comfortable

  • Available in 3 sizes

The Ex-K Harness Flite+ offers CE Level 2 protection to the back and chest.
Product Code: FF20112
Sizes Available: Small, Medium, Large
​CE: EN1621-2 Level 2 (Back).
SATRA M28:2007 [impact], prEN1621-3:2013 (2103-10) [sizing & ergonomics] (Chest).
EX-K ARM PROTECTOR
EX-K Forearm left 1.jpg
EX-K Forearm right 1.jpg

Features

  • Certified to EN1621-1 Level 2

  • Constructed from High Tech Nitrex Evo® armour

  • Moulded for comfort

  • Heat activated body moulding

  • Twin retaining straps and support sleeve

  • Perforated and breathable

  • Non restrictive

  • Multi sport use

  • RPT (Repeat Performance Technology)

  • Ergonomic design for increased comfort

The Forcefield EX-K Arm Protectors are fully CE approved to Level 2, the highest possible, and offer extended coverage of the elbow and forearm.

The moulded lightweight CE approved Nitrex Evo® armour creates flexible, breathable and heavy duty elbow and lower arm protection with RPT (Repeat Performance Technology) for guaranteed performance even after multiple impacts.
 
The ergonomic design allows full non restrictive arm movement with twin retaining straps and a forearm support sleeve for maximum stability.

 
Product Code: FF2014
Sizes Available: Small, Medium, Large
​CE: EN1621-1 Level 2
EX-K SHOULDER PROTECTOR
Ex K Shoulder Protector Left.jpg
Ex K Shoulder Protector Right.jpg

Features

  • Certified to EN1621-1 Level 2

  • Constructed from High Tech Nitrex Evo® armour

  • Moulded for comfort

  • Heat activated body moulding

  • Single retaining strap and adjustable fixing at the top

  • Perforated and breathable

  • Non restrictive

  • Multi sport use

  • RPT (Repeat Performance Technology)

  • Ergonomic design for increased comfort

The Forcefield EX-K Shoulder Protectors are fully CE approved to Level 2, the highest possible.

The moulded Nitrex Evo® armour is flexible, breathable and has RPT (Repeat Performance Technology) for guaranteed performance even after multiple impacts. The ideal addition to the modular EX-K Flite harness.

 
Product Code: FF2015
Sizes Available: Small, Medium, Large
​CE: EN1621-1 Level 2
PRO LITE K INSERTS
Pro-Lite-K-001.jpg
Pro-Lite-K-002.jpg

Features

  • Certified to EN1621-2 Level 2

  • Up to 30% lighter than previous version

  • Constructed using Kevlar thread

  • Now available in 8 sizes/shapes

  • Heat activated body moulding

  • Constructed from Nitrex Evo®

  • RPT (Repeat Performance Technology)

  • Moulds to body shape

  • Perforated and breathable

  • Flexible

  • Lightweight

  • CE Approved

Pro-Lite-K-007.jpg
Pro-Lite-K-008.jpg
Pro-Lite-K-009.jpg
Pro-Lite-K-010.jpg
Pro-Lite-K-011.jpg
Forcefield Pro Lite K back inserts are the market leader for good reason - huge performance, soft, comfortable with CE level 2 protection (Pro). They are available in 8 shapes to accommodate the variety of pocket shapes in jackets.

In true Forcefield style, the Pro has evolved into the Pro-Lite K. The continued development by our materials specialists has resulted in the CE level 2 inserts being lighter in weight by up 30%! The addition of Kevlar thread maximises the strength and durability of the inserts. So they are stronger and lighter- however these also offer even more impact protection than the last generation.

Please see below the list of shapes and dimensions. Also where applicable we have added the brands that these are suitable for*.
(*correct at the time of publication, please check your jacket shape to make sure the chosen insert will fit.)

 
  • Shape 001: Suitable for generic brands. (Weight: 366g. Height: 39cm. Width: 30cm.)
  • Shape 002: Suitable for generic brands. (Weight: 445g. Height: 45cm. Width: 34cm.)
  • Shape 003: Suitable for generic brands. (Weight: 446g. Height: 42cm. Width: 27cm.)
  • Shape 007: Suitable for Dainese. (Weight: 409g. Height: 44cm. Width: 25cm.)
  • Shape 008: Suitable for Dainese. (Weight: 369g. Height: 39cm. Width: 25cm.)
  • Shape 009: Suitable for Rukka. (Weight: 515g. Height: 52cm. Width: 29cm.)
  • Shape 010: Suitable for Alpinestars. (Weight: 477g. Height: 43cm. Width: 27cm.)
  • Shape 011: Suitable for Alpinestars. (Weight: 553g. Height: 50cm. Width: 27cm.)
                                                                                               
Pro-Lite-K-003.jpg
Product Code: FF1043
Sizes Available: See above
​CE: EN1621-2 Level 2
ELITE CHEST PROTECTOR
Elite chest 3D.jpg
Elite back flat.jpg

Features

  • Certified to prEN1621-3:2011

  • NitrexEvo® construction

  • Heat activated body moulding

  • Low profile slim design

  • RPT (Repeat Performance Technology)

  • 3D moulding

  • Breathable

  • Height and width adjustable removable harness

  • Available in 2 sizes

 
The CE approved Elite Chest Protector has been specifically designed to be as thin and flexible as possible whilst offering maximum comfort and protection for the sternum and chest while still allowing the rider to be able to easily fit it under a jacket or suit.

Made from Forcefield’s shock absorbing technology NitreEvo®, the Elite is very malleable allowing it to perfectly 3D mould to the user’s chest shape for optimum comfort and incorporates RPT (Repeat Performance Technology) to ensure no loss of protective performance even after multiple impacts.

Multiple vents and sculpted channels aid breathability while the 4-point elasticated harness is fully adjustable and can be removed if not needed.

 
Product Code: FF40131
Sizes Available: Small/Medium, Large/X-Large
​CE: prEN1621-3:2011
RIB PROTECTOR V2

Features

  • Certified to EN1621-2:2003 Level 1

  • Revised shape

  • Ergonomic design to contour to the body in a closer fitting way

  • Can be worn in 2 separate ways

  • Elastic shoulder straps

  • Secure Velcro fastening

  • Breathable

  • Heat-activated 3D mouldable

  • DRI-M technology (Dynamic Reactive Intelligent Material)

 
The new Forcefield Rib Protector V2 has a revised shape and now fits even closer to the body using heat activated 3D moulding to contour to the wearer’s shape.

It offers comfort and protection during sports where the ribs are particularly vulnerable. It can be used for multiple sports – karting, cycling, motorcycling, skiing and snowboarding. It is CE approved and available in three sizes.
 
The Rib Protector V2 is soft and comfortable to wear. It has RPT (Repeat Performance Technology) ensuring continued and consistent protection even after multiple impacts. Fully adjustable elastic shoulder straps and Velcro fastening ensure the optimum fit and comfort. Forcefield DRI-M Technology (Dynamic, Reactive, Intelligent Material) is integrated throughout.
 
Rib Protector V2 Main.jpg
Rib Protector V2 Strap 2.jpg
Product Code: FF40041
Sizes Available: Small, Medium, Large
​CE: EN1621-2:2003 Level 1
ABRASION RESISTANT (AR) KNEE PROTECTOR (CE1 & CE2)
AR Knee - Main.jpg
AR Knee - Side 1 - 6x4.JPG

Features

  • Certification details below

  • Abrasion resistant points where needed most. High tensile strength abrasion resistant fabric with internal coating specifically located on knee face and on outer side of the knee

  • Wrap-around - easy fit and removal

  • Simple up and over elasticated strap system

  • Elasticated adjustable external straps both top and bottom for extra security with silicone grip

  • TPR housing for smooth feed of elasticated straps with tab ends for easy adjustment

  • Option to wear over the top of outer wear

  • Additional ‘padding’ around the sides

  • Dual extra pads on outside of knee with single pad on the inner side

  • Open cut out behind knee - large vent

  • Soft backing fabric for comfort

  • Choice of Isolator CE1 or CE2 limb armour

  • Breathable

  • Easy to wash and keep fresh

  • Secure armour fit

  • Isolator 2 passes all 4 areas of the CE2 test (Ambient, Wet, Hot, Cold)

  • Isolator 1 armour is from only 8mm thick

  • Repeat Performance Technology

  • Use for on and off road

  • DRI-M Technology (Dynamic, Reactive, Intelligent Material)

 
Easy to fit with the option to be worn externally or next to the skin. Super comfortable, great for use over jeans, commuter use or general riding. Also suitable for off road and travel use. Unique wrap around fixing.

A high quality knee protector that can be worn over the top of outer wear, or next to the skin. Innovative design and a clever fastening system with lots of adjustability. Silicone gripper positioned on the inside keep the protector anchored in place - exactly where it needs to be. A clever abrasion resistant fabric covers the forward face of the protector and outer side resulting in a tough exterior where needed most. Additional side pads help protect the knee from side knocks. An open area at the reverse results in great breathability and added flexibility with no bunching of material.

A strong ‘do it all’ knee protector with clever features and lots of adjustability. High protection levels provided by the Isolator armour, and incredible comfort.

As with our other armoured products, the wearer can choose whether it’s fitted with Isolator CE1 or CE2 limb armour. This gives greater flexibility in terms of price, and armour characteristics. For example, a rider who rides predominantly off road in hot conditions, may well chose the CE1 limb armour as it’s thinner and lighter and offers greater breathability. If its road or race, touring, commuting or extreme enduro use, CE2 might be the preferred option.

 
Product Codes: A.R Knee CE1 (FF8110). A.R Knee CE2 (FF8111).
Sizes Available: One Size
​CE: A.R Knee CE1: EN1621-1:2012 Type B Level 1. A.R Knee CE2: EN1621-1:2012 Type B Level 2.
ISOLATOR CE1 UPGRADE ARMOUR - BACK INSERTS
L1BackInsertFront001.jpg
Cropped L1InsertSide.jpg
Back Insert 001 shape
Product Code: FF4008-001
Max H x W: 375mm x 285mm
L1BackInsertFront0032.jpg
Cropped L1InsertSide.jpg
Back Insert 003 shape
Product Code: FF4008-003
Max H x W: 425mm x 270mm

Features

  • Certified to EN1621-2:2014 Level 1

  • Super slim construction (12mm)

  • Heat activated

  • Breathable

  • Soft and comfortable

  • RPT (Repeat Protection Technology)

  • High energy absorption

  • Lightweight (from only 57g)

Super slim construction: lowest profile available at 12mm!

The new Forcefield Isolator 1 range offers the best CE Level 1 protection, whilst maintaining low weight and minimal size. Designed to replace existing bulky armour, the super soft heat-reactive Isolator 1 back armour is just 12mm thick. It offers superior impact protection, having been tested and passed against the latest CE 1 standards (including ambient and wet tests).

Isolator 1 back inserts are available in the 001 and the 003 shape. The Isolator 1 range also includes CE Level 1 limb armour for the elbow/knee, hip, knee and shoulder.
CE: EN1621-2:2014 Level 1
ISOLATOR CE1 UPGRADE ARMOUR - LIMB ARMOUR
Cropped L1ElbowFront.jpg
CroppedL1ElbowSide.jpg
Elbow/Knee Armour
Product Code: FF4008-EK
Max H x W: 245mm x 160mm
Weight: 79g
Cropped L1KneeFront.jpg
Cropped L1KneeSide.jpg
Knee Armour
Product Code: FF4008-K
Max H x W: 240mm x 165mm
Weight: 77g
Cropped L1HipFront.jpg
Cropped L1HipSide.jpg

Features

  • Certified to EN1621-1:2012 Level 1

  • Super slim construction (8mm)

  • Heat activated

  • Breathable

  • Soft and comfortable

  • RPT (Repeat Protection Technology)

  • High energy absorption

  • Lightweight (from only 57g)

Hip Armour
Product Code: FF4008-H
Max H x W: 230mm x 115mm
Weight: 57g
Cropped L1ShoulderFront.jpg
Cropped L1ShoulderSide.jpg
Shoulder Armour
Product Code: FF4008-S
Max H x W: 205mm x 150mm
Weight: 68g
Super slim construction: lowest profile available at 8mm!

The new Forcefield Isolator 1 range offers the best CE Level 1 protection, whilst maintaining low weight and minimal size. Designed to replace existing bulky armour, the super soft heat-reactive Isolator 1 limb armour is just 8mm thick. It offers superior impact protection, having been tested and passed against the latest CE 1 standards (including ambient and wet tests).

The Isolator 1 limb armour range comprises:
  • Elbow/Knee Armour
  • Hip Armour
  • Knee Armour
  • Shoulder Armour
The Isolator 1 range also includes CE Level 1 back inserts.
CE: EN1621-1:2012 Level 1
ISOLATOR CE2 UPGRADE ARMOUR - BACK INSERTS
L2BackInsertFront001.jpg
L2BackInsertFront002.jpg
L2BackInsertFront0032.jpg
Cropped L2InsertSide.jpg
​Back Insert 001 shape
Product Code: FF4009-001
Max H x W: 375mm x 285mm
​Back Insert 002 shape
Product Code: FF4009-002
Max H x W: 455mm x 345mm
​Back Insert 003 shape
Product Code: FF4009-003
Max H x W: 425mm x 270mm

Features

  • Certified to EN1621-2:2014 Level 2

  • Huge protection: passes at 6.63kN

  • Heat activated

  • Breathable

  • Soft and comfortable

  • RPT (Repeat Protection Technology)

  • High energy absorption

  • Lightweight

Huge protection: passes CE Level 2 test at 6.63kN (the pass level is 9kN or less)!

The new Forcefield Isolator 2 offers the best CE Level 2 protection, whilst maintaining low weight and minimal size. Designed to replace existing bulky armour, the super soft heat-reactive Isolator 2 back armour is just 18mm thick. It offers superior impact protection, having been tested and passed against the latest CE 2 standards (including ambient, wet, hot and cold tests).


Isolator 1 back inserts are available in the 001, 002 and the 003 shape. The Isolator 2 range also includes CE Level 2 limb armour for the elbow/knee, hip, knee and shoulder.
CE: EN1621-2:2014 Level 2
ISOLATOR CE2 UPGRADE ARMOUR - LIMB ARMOUR
Cropped L2ElbowFront.jpg
Cropped L2ElbowSide.jpg
Elbow/Knee Armour
Product Code: FF4009-EK
Max H x W: 245mm x 160mm
Weight: 92g
Cropped L2KneeFront.jpg
Cropped L2KneeSide.jpg
Knee Armour
Product Code: FF4009-K
Max H x W: 240mm x 165mm
Weight: 96g
Cropped L2HipFront.jpg
Cropped L2HipSide.jpg

Features

  • Certified to EN1621-1:2012 Level 2

  • Huge protection: passes from 10.6kN

  • Heat activated

  • Breathable

  • Soft and comfortable

  • RPT (Repeat Protection Technology)

  • High energy absorption

  • Lightweight

Hip Armour
Product Code: FF4009-H
Max H x W: 230mm x 115mm
Weight: 65g
Cropped L2ShoulderFront.jpg
Cropped L2ShoulderSide.jpg
Shoulder Armour
Product Code: FF4009-S
Max H x W: 205mm x 150mm
Weight: 80g
Huge protection: passes CE Level 2 test from 10.6kN (the pass level is 20kN or less)!

The new Forcefield Isolator 2 offers the best CE Level 2 protection, whilst maintaining low weight and minimal size. Designed to replace existing bulky armour, the super soft heat-reactive Isolator 2 limb armour is just 12mm thick. It offers superior impact protection, having been tested and passed against the latest CE 2 standards (including ambient, wet, hot and cold tests).


The Isolator 2 limb armour range comprises:
  • Elbow/Knee Armour
  • Hip Armour
  • Knee Armour
  • Shoulder Armour
The Isolator 2 range also includes CE Level 2 back inserts.
CE: EN1621-1:2012 Level 2
FREEFIT CE1 BACK INSERT
Isolator 2 insert with Velcro.jpg
We have noticed a growing number of jackets available in store with no pockets for back inserts - just strips of loop Velcro.

In addition to the regular Isolator 1 and Isolator 2 back inserts - we can now offer these complete with stitched on hook Velcro.
Isolator 1 product codes:
001 shape with Velcro is FF4008-001/v
003 shape with Velcro is FF4008-003/v

Isolator 2 product codes:
001 shape with Velcro is FF4009-001/v
002 shape with Velcro is FF4009-002/v
003 shape with Velcro is FF4009-003/v
FREEFIT CE1 BACK INSERT
FreeFit CE1 Back Insert.jpg

Features

  • Certified to EN1621-2: 2014 Level 1

  • Heat activated

  • Breathable
  • Soft and comfortable

  • RPT (Repeat Protection Technology)

  • High energy absorption

  • Lightweight

Retro fit for Pro Shirt, Pro Jacket, Pro Vest, Mons Jacket, Mons Vest, Sport Shirt and new Sport Suit.
 
The CE1 ‘FreeFit’ back armour part has been re-designed and certified as a CE1 product for motorcyclists and winter sports. The 3-layer construction provides unrivalled ‘free fitting’ flexibility. This is achieved by a unique cutting pattern throughout the layers of Forcefield’s own Dynamic Reactive Intelligent Materials (DRI-M Technology).
 
The FreeFit CE1 back insert passes the ambient, wet and low temperature -10°C impact tests.

Sizes available:
Small: Torso length (waist to shoulder) 32-37cm. Retention pocket size: 500mm x 270mm.
Medium: Torso length (waist to shoulder) 37-41cm. Retention pocket size: 530mm x 270mm.
Large: Torso length (waist to shoulder) 41-44cm. Retention pocket size: 560mm x 270mm.

 
Product Code: FF1034

Sizes Available: Small, Medium, Large

CE: EN1621-2: 2014 Level 1

FREEFIT CE2 BACK INSERT
FreeFit CE2 Back Insert.JPG

Features

  • Certified to EN1621-2: 2014 Level 2

  • Heat activated

  • Breathable
  • Soft and comfortable

  • RPT (Repeat Protection Technology)

  • High energy absorption

  • Lightweight

Retro fit for Pro Shirt, Pro Jacket, Pro Vest, Mons Jacket, Mons Vest, Sport Shirt and new Sport Suit.
 
The CE2 ‘FreeFit’ back armour part has been re-designed and certified as a CE2 product for motorcyclists and winter sports. The 4-layer construction provides unrivalled ‘free fitting’ flexibility. This is achieved by a unique cutting pattern throughout the layers of Forcefield’s own Dynamic Reactive Intelligent Materials (DRI-M Technology).
 
The FreeFit CE2 back insert passes the ambient, wet and low temperature -10°C impact tests.

Sizes available:
Small: Torso length (waist to shoulder) 32-37cm. Retention pocket size: 500mm x 270mm.
Medium: Torso length (waist to shoulder) 37-41cm. Retention pocket size: 530mm x 270mm.
Large: Torso length (waist to shoulder) 41-44cm. Retention pocket size: 560mm x 270mm.

 
Product Code: FF1035
Sizes Available: Small, Medium, Large
CE: EN1621-2: 2014 Level 2
FREEFIT CE1 CHEST PROTECTOR - RACE READY
FreeFit CE1 Chest Protector.jpg

Features

  • Certification details below

  • Heat activated

  • Breathable
  • Soft and comfortable

  • RPT (Repeat Protection Technology)

  • High energy absorption

  • Lightweight

The CE1 chest armour part can be inserted into existing Forcefield garments, or can be used as a standalone item.
The design is 3 layered and passes the very latest chest protector CE test. It provides unrivalled ‘free fitting’ flexibility which is achieved by a unique cutting pattern throughout the layers of Forcefield’s own Dynamic Reactive Intelligent Materials (DRI-M Technology.)
 
The FreeFit CE1 chest protector passes the ambient, wet and low temperature -10°C impact tests.

Sizes available:
Small: Retention pocket size: 245mm x 305mm.
Medium: Retention pocket size: 250mm x 330mm.
Large: Retention pocket size: 265mm x 355mm.

 
Product Code: FF40133
Sizes Available: Small, Medium, Large
CE: FprEN1621-3:2017 Full Chest, C Level 1 Type A
FREEFIT CE2 CHEST PROTECTOR - STANDARD FITMENT
FreeFit CE2 Chest Protector.JPG

Features

  • Certification details below

  • Heat activated

  • Breathable
  • Soft and comfortable

  • RPT (Repeat Protection Technology)

  • High energy absorption

  • Lightweight

The CE2 chest armour part can be inserted into existing Forcefield garments, or can be used as a standalone item. The design is 4 layers and is certified to CE2 (see certification details below). It provides unrivalled ‘free fitting’ flexibility which is achieved by a unique cutting pattern throughout the layers of Forcefield’s own Dynamic Reactive Intelligent Materials (DRI-M Technology.)

Sizes available:
Small: Chest 85cm. Torso length (waist to shoulder) 87.5cm. Retention pocket size: 245mm x 305mm.
Medium: Chest 90cm. Torso length (waist to shoulder) 92.5cm. Retention pocket size: 250mm x 330mm.
Large: Chest 95cm. Torso length (waist to shoulder) 95cm. Retention pocket size: 265mm x 355mm.

 
Product Code: FF40132
Sizes Available: Small, Medium, Large
CE: SATRA Document M28: 2007 Level 2

© Forcefield Body Armour is a division of Davies Odell Ltd

Rushden, Northamptonshire, United Kingdom

MIB Horizontal - Left - South East.jpg