Forcefield has launched a new 2-tier Winter Pro and Winter Sport range of armoured clothing for the 2019/2020 season.
These products have been designed specifically for snowboarders, skiers and skaters, to protect the upper and lower body
whilst keeping the wearer as comfortable as possible.
 
WINTER PRO SHIRT X-V 2
Pro Shirt XV2  - 4x3.jpg
Pro Shirt XV2 or Jacket XV2 rear detail

Features

  • Certification details below

  • New Slate colourway

  • CE2 armour in back, chest, shoulder and elbow

  • BeCool™ 4-channel, base layer technology for increased breathability and wicking

  • Heat-activated body moulding

  • Ergonomic design

  • Airflow control and humidity discharge

  • Anti-bacterial

  • New X Vents provide increased airflow

  • Armour windows providing extra venting

  • Lighter weight removable armour

  • Armour thickness from only 12mm

  • Isolator CE 2 passes all 4 areas of the CE2 test (Ambient, Wet, Hot, Cold)

  • Re-designed chest and back protector parts (CE2) and now ‘free fitting’

  • Repeat Performance Technology

  • DRI-M technology (Dynamic Reactive Intelligent Materials)

The Pro Shirt offers more. Featuring a CE 2 ‘free fitting’ back insert and chest part, and Isolator CE 2 Isolator limb armour. Also featuring a super lightweight construction, complete with side zip.

New production techniques have resulted in a super strong open mesh (X Vent) that is even more breathable, yet super soft and strong. This runs through the high heat areas, and also provides ‘armour windows’. Not only looking good, but also provides extra breathability and lighter weight.
 
The CE 2 back and chest armour parts have been re-designed and now provide un-rivalled ‘free fitting’ flexibility. This is achieved by a unique cutting pattern throughout the layers of Forcefield’s own Dynamic Reactive Intelligent Materials (DRI-M technology). Also available without armour.
Product Code: FF3056
Sizes Available: X-Small, Small, Medium, Large, X-Large
CE: EN1621-1:2012 Level 2 (Limbs)  + EN1621-2:2014 Level 2 (Back)  + SATRA Document M28:2007 Level 2 (Chest)
WINTER PRO JACKET X-V 2
Pro Jacket XV2 - 4x3.jpg
Pro Shirt XV2 or Jacket XV2 rear detail

Features

  • Certification details below

  • New Slate colourway

  • CE2 armour in back, shoulder and elbow

  • BeCool™ 4-channel, base layer technology for increased breathability and wicking

  • Heat-activated body moulding

  • Ergonomic design

  • Airflow control and humidity discharge

  • Anti-bacterial

  • New X Vents provide increased airflow

  • Armour windows providing extra venting

  • Lighter weight removable armour

  • Armour thickness from only 12mm

  • Isolator 2 passes all 4 areas of the CE2 test (Ambient, Wet, Hot, Cold)

  • Re-designed CE2 back protector and now ‘free fitting’

  • Centre zip

  • Repeat Performance Technology

  • DRI-M technology (Dynamic Reactive Intelligent Materials)

The Pro Jacket offers more options. Featuring a CE 2 ‘free fitting’ back insert and Isolator CE 2 Isolator limb armour. It features a super lightweight construction, and has a centre zip.

New production techniques have resulted in a super strong open mesh (X Vents) that is even more breathable, yet super soft and strong. This runs through the high heat areas, and also provides ‘armour windows’. Not only looking good, but also provides extra breathability and lighter weight.
 
The CE 2 back armour parts have been re-designed and now provide un-rivalled ‘free fitting’ flexibility. This is achieved by a unique cutting pattern throughout the layers of Forcefield’s own Dynamic Reactive Intelligent Materials (DRI-M technology). Also available without armour.
Product Code: FF3139
Sizes Available: X-Small, Small, Medium, Large, X-Large
CE: EN1621-1:2012 Level 2 (Limbs)  + EN1621-2:2014 Level 2 (Back)
WINTER PRO VEST X-V 1 & 2
Pro Vest XV2 - 4x3.jpg
Pro Vest XV rear - 4x3.jpg

Features

  • Certification details below

  • New Slate colourway

  • New X Vents provide increased airflow

  • BeCool™ 4-channel, base layer technology for increased breathability and wicking

  • Heat-activated body moulding

  • Ergonomic design

  • Airflow control and humidity discharge

  • Anti-bacterial

  • Armour windows providing extra venting

  • Lighter weight removable armour

  • Re-designed CE2 back protector and now ‘free fitting’

  • Centre zip

  • Repeat Performance Technology

  • DRI-M technology (Dynamic Reactive Intelligent Materials)

The Pro Vest offers more options. Both versions offer full CE2 back protection. Both Pro Vests feature a super lightweight construction, and have a centre zip.
 
New production techniques have resulted in a super strong open mesh (X Vents) that is even more breathable, yet super soft and strong. This runs through the high heat areas, and also provides ‘armour windows’. Not only looking good, but also provides extra breathability and lighter weight.
 
The CE2 back armour parts have been re-designed and now provide un-rivalled ‘free fitting’ flexibility. This is achieved by a unique cutting pattern throughout the layers of Forcefield’s own Dynamic Reactive Intelligent Materials (DRI-M technology).
 
The Winter Pro Vest X-V2 also comes complete with chest pads and height adjustable waist band. (In addition to the XV-1 version). Also available without armour.
Product Code: FF3079 (X-V 1), FF3069 (X-V 2 with chest pads and waistband)
Sizes Available: X-Small, Small, Medium, Large, X-Large
CE: X-V 1: EN1621-2:2014 Level 1 (Back). X-V 2: EN1621-2:2014 Level 2 (Back)
WINTER PRO PANT X-V 2
Pro Pant XV2 - 4x3.jpg

Features

  • Certification details below

  • New Slate colourway

  • Armour windows providing extra venting

  • BeCool™ 4-channel, base layer technology for increased breathability and wicking

  • Heat-activated body moulding

  • Ergonomic design

  • Airflow control and humidity discharge

  • Anti-bacterial

  • Lighter weight removable armour

  • Armour thickness from only 12mm CE2

  • Isolator 2 passes all 4 areas of the CE2 test (Ambient, Wet, Hot, Cold)

  • Draw cord waist band

  • Repeat Performance Technology

  • DRI-M technology (Dynamic Reactive Intelligent Materials)

The all new Pro Pant is constructed using the most breathable BeCool™ base layers fabrics. Ergonomically shaped specific Isolator armour pieces have been designed to provide maximum protection, while offering huge un restricted movement and breathability.

The 5 piece armour set covers hips, knees and buttocks/coccyx, and is removable quickly and easily.
 
New production techniques have resulted in a super strong open mesh that is even more breathable, yet super soft and strong. We use this in the Pro Short to create ‘armour windows’. Not only looking good, but also provides extra breathability and lighter weight.
 
The ultimate protective sports full length pant. DRI-M technology (Dynamic Reactive Intelligent Materials). Also available without armour.
Product Code: FF30443
Sizes Available: X-Small, Small, Medium, Large, X-Large
CE: EN1621-1:2012 Level 2 (Limbs) - Hip only
WINTER PRO SHORTS X-V 2
Pro Shorts XV2.jpg

Features

  • Certification details below

  • New Slate colourway

  • Armour windows providing extra venting

  • BeCool™ 4-channel, base layer technology for increased breathability and wicking

  • Heat-activated body moulding

  • Ergonomic design

  • Airflow control and humidity discharge

  • Anti-bacterial

  • Lighter weight removable armour

  • Armour thickness from only 12mm CE2

  • Isolator 2 passes all 4 areas of the CE2 test (Ambient, Wet, Hot, Cold)

  • Draw cord waist band

  • Soft silicone leg gripper

  • Repeat Performance Technology

  • DRI-M technology (Dynamic Reactive Intelligent Materials)

The all new Pro Short is constructed using the most breathable BeCool™ base layers fabrics. Ergonomically shaped specific Isolator armour pieces have been designed to provide maximum protection, while offering huge un restricted movement and breathability.
 
The 3 piece armour set covers hips and buttocks/coccyx, and is removable quickly and easily.
 
New production techniques have resulted in a super strong open mesh that is even more breathable, yet super soft and strong. We use this in the Pro Short to create ‘armour windows’. Not only looking good, but also provides extra breathability and lighter weight.
 
The ultimate protective sports short. DRI-M technology (Dynamic Reactive Intelligent Materials). Also available without armour.
 
Product Code: FF30403
Sizes Available: X-Small, Small, Medium, Large, X-Large
CE: CE: EN1621-1:2012 Level 2 (Limbs) - Hip only
WINTER PRO TUBE X-V 2
Pro Tube XV2 side - 4x3.jpg
Pro Tube XV2 Rear - 4x3.jpg

Features

  • Certification details below

  • New Slate colourway

  • New X Vents provide increased airflow

  • BeCool™ 4-channel, base layer technology for increased breathability and wicking

  • Heat-activated body moulding

  • Ergonomic design

  • Airflow control and humidity discharge

  • Anti-bacterial

  • Armour windows providing extra venting

  • Lighter weight breathable base layer fabric

  • Lighter weight removable armour

  • Armour thickness from only 12mm CE2

  • Isolator 2 passes all 4 areas of the CE2 test (Ambient, Wet, Hot, Cold)

  • Removable dual elastic straps

  • Repeat Performance Technology

  • DRI-M technology (Dynamic Reactive Intelligent Materials)

The re-designed Pro Tube comes with Isolator 2 armour as standard.

Super soft, yet strong construction using breathable materials results in a super comfortable product that you cannot tell you are wearing. Now with increased venting on the front face, and softer with venting at the rear. Suitable for elbows and knees. DRI-M technology (Dynamic Reactive Intelligent Materials). Also available without armour.
 
Product Code: FF3134
Sizes Available: X-Small, Small, Medium, Large
CE: CE: EN1621-1:2012 Level 2 (Limbs)
WINTER SPORT SHIRT 1
Sport Shirt 1 - cropped.jpg
Sport Shirt rear - cropped.jpg

Features

  • Certification details below

  • New Charcoal and Cyan colourway

  • Secure armour fit

  • Lightweight, high performance base layer with armour

  • Breathable

  • Armour thickness from only 8mm (CE1)

  • CE2 ‘Freefit’ layered back and chest armour

  • Repeat Performance Technology

  • Heat-activated body moulding

  • Ergonomic design

  • Side entry zip

  • DRI-M Technology (Dynamic, Reactive, Intelligent Material)

Easy to wear, with protection covering the back, and chest, (CE 2 ‘free fitting’ back insert and Chest part) shoulder and elbow (CE1). This is a safer way to protect the upper body – and it’s far more comfortable. Also featuring a super lightweight construction, and has an easy side zip.

Intelligent production techniques results in a breathable, yet super soft and strong fabric.
 
The CE 2 back and chest armour parts have been re-designed and now provide un-rivalled ‘free fitting’ flexibility. This is achieved by a unique cutting pattern throughout the layers of Forcefield’s own Dynamic Reactive Intelligent Materials. DRI-M technology. The Sport Shirt is also available without armour.
Product Code: FF7120
Sizes Available: X-Small, Small, Medium, Large, X-Large
CE: EN1621-1:2012 Level 1 (Limbs)  + EN1621-2:2014 Level 2 (Back)  + SATRA Document M28:2007 Level 2 (Chest)
WINTER SPORT JACKET 1
Sport Jacket 1 - 4x3.jpg
Sport Jacket 1 rear - 4x3.jpg

Features

  • Certification details below

  • New Charcoal and Cyan colourway

  • Secure armour fit

  • Lightweight, high performance base layer material

  • Breathable

  • Armour thickness from only 8mm (CE1)

  • CE2 ‘Freefit’ back armour

  • Centre zip

  • Repeat Performance Technology

  • Heat-activated body moulding

  • Ergonomic design

  • DRI-M Technology (Dynamic, Reactive, Intelligent Material)

Easy to wear, with protection covering the back, (CE 2 ‘free fitting’ back insert) shoulder and elbow (CE1). This is a safer way to protect the upper body – and it’s far more comfortable. Also featuring a super lightweight construction, and has an easy entry centre zip.

Intelligent production techniques results in a breathable, yet super soft and strong fabric.
 
The CE 2 back armour has been re-designed and now provide un-rivalled ‘free fitting’ flexibility. This is achieved by a unique cutting pattern throughout the layers of Forcefield’s own Dynamic Reactive Intelligent Materials. DRI-M technology. The Sport Jacket is also available without armour.
 
Product Code: FF7220
Sizes Available: X-Small, Small, Medium, Large, X-Large
CE: EN1621-1:2012 Level 1 (Limbs)  + EN1621-2:2014 Level 2 (Back)
WINTER SPORT PANT 1
Sport Pant 1 - 4x3.jpg
Sport Pant 1 rear - 4x3.jpg

Features

  • Certification details below

  • New Charcoal and Cyan colourway

  • Secure armour fit

  • Lightweight, high performance compression material

  • Breathable

  • New ergonomic shaped armour hips and buttocks

  • Armour thickness from only 8mm (CE1)

  • Repeat Performance Technology

  • Heat-activated body moulding

  • Ergonomic design

  • DRI-M Technology (Dynamic, Reactive, Intelligent Material)

Easy to wear, with CE1 protection covering the hips, knees and buttocks, this is a great way to protect the lower body to a higher level than traditional armour, and it’s far more comfortable.
Intelligent production techniques results in a breathable, yet super soft and strong fabric.

The Sport Pant 1 has a slim profile due to the ergonomically-designed armour parts for the hips and buttocks. Complete with draw cord and stirrups for a precise fit. The perfect base layer armoured pant. The Sport Pant is also available without armour.

 
Product Code: FF7330
Sizes Available: X-Small, Small, Medium, Large, X-Large
CE: EN1621-1:2012 Level 1 (Limbs) - Hip only
WINTER SPORT TUBE 1
Sport Tube 1 side - 4x3.jpg
Sport Tube 1 rear - 4x3.jpg

Features

  • Certification details below

  • New Charcoal and Cyan colourway

  • Lightweight, high performance compression material

  • Ideal armour fit and body placement

  • Lightweight, removable armour

  • Armour thickness from only 8mm (CE1)

  • Repeat Performance Technology

  • Heat-activated body moulding

  • Ergonomic design

  • DRI-M Technology (Dynamic, Reactive, Intelligent Material)

Easy to wear and slide on and off, with protection covering the elbows and knees this is a great way of protecting limbs to a higher level, and incredibly comfortable.

The Sport Tube 1 has a compression fit and a slim profile. The Sport Tube is also available without armour.
 
Product Code: FF7440
Sizes Available: Small, Medium, Large
CE: EN1621-1:2012 Level 1 (Limbs)
SLAM 1 SHORTS
Slam Isolator 1.jpg
Slam Isolator 1 rear side.jpg

Features

  • Certification details below

  • New Ti ('Titanium') colourway

  • 8mm CE level 1 Isolator armour offers increased flexibility and comfort, yet with a slimline look

  • New armour shapes offer improved body contouring

  • Greater flexibility

  • BeCool™ base layer technology for increased breathability and wicking

  • Heat activated 3D body moulding

  • Removable armour

  • RPT (Repeat Performance Technology)

  • Machine washable (with armour removed)

  • Draw cord waist fastener for superior fit and comfort

A new lighter weight short, with revised ergonomic design armour shapes. Our new Isolator armour technology has enabled us to introduce new armour shapes on the hips and buttocks, and cut the thickness down from the previous 17mm foams to a remarkable 8mm, whilst still offering the same CE level 1 certification.

The Forcefield Slam 1 Short has been designed specifically for snowboarders and skiers to protect the lower back, buttocks, coccyx and hips, whilst being as comfortable to wear as possible. The high energy absorbing, super low profile Isolator CE approved layer armour is fitted into a pocket in the rear of the shorts and pockets at the hips, allowing it to be removed so the shorts can be machine washed for maximum hygiene.
 
Slam Short 1 is a next-to-skin, technical base layer, constructed using BeCool™ fibre which has a greater diffusive area than standard man-made or cotton fibres, allowing high levels of breathability, wicking and fast drying. It is also being anti-bacterial for freshness, even after multiple days on the slopes. During exercise, the unique shape of the BeCool™ fibre means it acts like a fan extracting hot and wet air away from the body and replacing it with cool and fresh air to help maintain core body temperatures in both cold and hot conditions. Fastened at the waist by a draw cord and with gripper elastic at the legs, the shorts offer a comfortable and practical alternative to wearing separate base layers and armour.

All armour has Forcefield DRI-M technology (Dynamic, Reactive, Intelligent Material) fitted throughout.
Product Code: FF3045
Sizes Available: X-Small, Small, Medium, Large, X-Large
​CE: EN1621-1:2012 Level 1 (Hip only)
BOOM SHORTS TI
Boom CE1 Front.jpg
Boom CE 1 Rear.jpg

Features

  • Certification details below

  • Buttock and thigh pads constructed to meet CE 1 impact requirements

  • New Ti ('Titanium') colourway

  • Heat activated body moulding

  • Constructed from BeCool™ with humidity discharge function

  • Removable armour at the thigh, hip, buttock/coccyx

  • RPT (Repeat Performance Technology)

  • Machine washable (with armour removed)

  • Draw cord waist fastener for superior fit and comfort

  • Tested to -10° Celsius

The Forcefield Boom Shorts Ti combine the very best features and protection from the Forcefield Action Shorts and Board Shorts to create a flexible, comfortable and high impact absorbing short ideal for the mountain or park. Now in a new 'Titanium' colourway.

Complete with CE 1 approved, high energy absorbing, low profile (3-layer) armour located at the hips, which provides RPT (Repeat Performance Technology) to ensure that even after multiple impacts there is no loss of protective performance. Thigh and combined buttocks/coccyx armour pads are also RPT and all pieces are removable to allow the shorts to be machine washed for maximum hygiene.

The tailored shorts are made from BeCool™, a unique technical fibre that has a greater diffusive area than standard fibre, which aids the control of body temperature during exercise by offering high levels and breathability, wicking and fast drying whatever the conditions the shorts are being used in. They are fastened at the waist by a draw cord and with gripper elastic at the legs for superior fit and comfort. The Forcefield Boom Short Ti offers unparalleled comfort and performance for those demanding the ultimate in lower body protection.

All Forcefield armour has DRI-M Technology built into it (Dynamic, Reactive, Intelligent Material).

 
Product Code: FF3075
Sizes Available: X-Small, Small, Medium, Large, X-Large
​CE: EN1621-1:2012 Level 1 (Hip only)
BOOM SHORTS TI JUNIOR

Features

  • New Ti ('Titanium') colourway

  • Two layer buttock pad, hip pads and thigh pads

  • Heat activated body moulding

  • Constructed from BeCool™ with humidity discharge function

  • Removable energy absorbing material at the thigh, hip, buttock/coccyx

  • RPT (Repeat Performance Technology)

  • Machine washable (with armour removed)

  • Draw cord waist fastener for superior fit and comfort

The Forcefield Boom Shorts Ti Junior combine the very best features and protection from the Forcefield Action Shorts and Board Shorts to create a flexible, comfortable and high impact absorbing short ideal for the mountain or park. Now in a new 'Titanium' colourway.

The Forcefield Boom Short Ti Junior is fitted with high energy absorbing (2-layer) low profile Forcefield material located at the hips, thighs and combined buttocks/coccyx. These are removable to allow the shorts to be machine washed for maximum hygiene. The energy absorbing materials used incorporate Forcefield DRI-M technology (Dynamic, Reactive, Intelligent Material) which provides RPT (Repeat Performance Technology) to ensure that even after multiple impacts there is no loss of protective performance.

The tailored shorts are made from BeCool™, a unique technical fibre that has a greater diffusive area than standard fibre, which aids the control of body temperature during exercise by offering high levels and breathability, wicking and fast drying, whatever the conditions the shorts are being used in.The Boom Short Ti Junior is fastened at the waist by a draw cord, and the gripper elastic at the legs provide comfort and a superior fit. These shorts offer unparalleled comfort and performance for those demanding the ultimate in lower body protection.

 
Boom kids front 1.jpg
Boom kids rear 2.jpg
Product Code: FF3085
Sizes Available: XXX-Small, XX-Small
LIMB TUBES - ELBOW/KNEE PROTECTORS
Limb tube arm RH.jpg
Limb Tubes leg RH.jpg

Features

  • Certified to EN1621-1:2012 Level 1

  • New Ti ('Titanium') colourway

  • 9mm CE Level 1 Isolator armour, increased flexibility and comfort and slimline look

  • BeCool™ base layer technology for increased breathability and wicking

  • Dual detachable elastic straps to match

  • Heat activated body moulding

  • Machine washable (with armour removed)

  • Vented panels for increased breathability

  • Lightweight

  • RPT (Repeat Performance Technology)

  • Ergonomic design for increased comfort

Limb Tubes - a tried and tested product, now with slimmer, lighter and more protective armour for the elbows and knees - and in a new 'Titanium' colourway.

Forcefield Limb Tubes are tube style sleeves fitted with lightweight, breathable and fully CE approved elbow or knee protection. The dual adjustable retaining straps provide extra security. Limb Tubes are now available in four sizes. Designed for ease of use and ultimate comfort, the protection is provided by the inserted CE approved Isolator CE1 armour. This can be removed allowing the tube to be washed for prolonged freshness. As with all Forcefield Body Armour, the Limb Tubes have RPT (Repeat Performance Technology) which allows the armour to withstand multiple impacts with no loss of protective performance, keeping you safe time after time.

All armour has Forcefield DRI-M technology (Dynamic, Reactive, Intelligent Material) fitted throughout.

 
Product Code: FF3054
Sizes Available: X-Small, Small, Medium, Large
CE: EN1621-1:2012 Level 1
* On size XS the straps are not detachable
MONS JACKET
Mons Jacket front.jpg
Mons Jacket back angled.jpg

Features

  • Certification details below

  • Two-tone colourway

  • Removable CE level 2 back protector fitted into internal pocket

  • Removable Isolator 1 armour fitted in the shoulders and elbows. Super-light and slimline CE level 1 armour - only 8mm

  • Thumb loops

  • BeCool™ 4-channel, base layer technology for increased breathability and wicking

  • Evo Vent Zones in high heat areas

  • Heat activated body moulding

  • Ergonomic design

  • Airflow control and humidity discharge

  • Anti-bacterial

  • RPT (Repeat Performance Technology)

  • Machine washable (with the armour removed)

  • Fast drying

Evolved from the popular Pro-Shirt X-V, the new Mons Jacket is specifically designed for the snow market. Revised, lighter and offering the protection where it’s needed most. It’s a super slim and lightweight armoured base layer made of BeCool™ fabric that features a centre zip-up.

The Forcefield Mons Jacket is the ultimate all action shirt with full, removable, CE approved armour located at the elbows, shoulders and back - all housed in a highly breathable BeCool™ technical base layer shell. The Mons Jacket has a conventional centre entry zip with neat ‘garage’ features for added comfort and Evo Vent Zones to allow increased air flow - all in an ergonomic design to ensure the optimum in fit and comfort, whatever your body shape.
 
Designed to work with the body’s movement, the moulded Isolator 1 armour (elbows and shoulders) together with the CE2 back insert, is fully CE approved. It 3D moulds to the body shape providing RPT (Repeat Performance Technology) ensuring continued and consistent protection, even after multiple impacts. The anti-bacterial BeCool™ fabric offers industry leading levels of heat and moisture management even in the most extreme conditions, leaving you protected, safe and comfortable. During exercise, the unique shape of the BeCool™ fibre means it acts like a fan extracting hot and wet air away from the body and replacing it with cool and fresh air to help maintain core body temperatures in both cold and hot conditions.

All armour has Forcefield DRI-M technology (Dynamic, Reactive, Intelligent Material) fitted throughout.

 
Product Code: FF8001
Sizes Available: X-Small, Small, Medium, Large, X-Large
​CE: EN1621-1:2012 Level 1 (Limb Armour) / EN1621-2:2014 Level 2 (Back Insert)
MONS VEST
Mons Vest front and side.jpg
Mons Vest back and side.jpg

Features

  • Certified to EN1621-2:2014 Level 2

  • New two-tone colourway

  • Removable CE level 2 back protector fitted into internal pocket

  • BeCool™ 4-channel base layer technology for increased breathability and wicking

  • Heat activated 3D body moulding

  • Highly flexible & breathable

  • Machine washable (with the armour removed)

  • RPT (Repeat Performance Technology)

  • Front zip fastening

Continuing its success from last season, the Mons Vest remains the lightest and most comfortable way to wear a CE level 2 back protector for Winter sports. Now in a new two-tone colourway.

The Forcefield Mons Vest incorporates a highly flexible and breathable CE approved back protector, housed in an ergonomically-designed technical fabric vest, to create the ultimate base layer. The lightweight and 3D moulding, CE Level 2 approved back armour is located inside an internal pocket, so it can be easily removed to allow the vest to be washed. It features RPT (Repeat Performance Technology) ensuring protection, even after multiple impacts. The body of the Mons Vest is created from BeCool™ - a unique fibre that has a greater diffusive area than standard fibre; this ensures high levels of breathability and comfort.

BeCool™ is also anti-bacterial, and the Evo Vent Zones offer industry leading levels of heat and moisture management even in the most extreme conditions, leaving you protected, safe and comfortable. During exercise, the unique shape of the BeCool™ fibre means it acts like a fan extracting hot and wet air away from the body and replacing it with cool and fresh air to help maintain core body temperatures in both cold and hot conditions. Along with the heavy duty zip and comfort ‘garage’ there is an optional securing waist belt that can be height adjusted to ensure the optimum fit.

All armour has Forcefield DRI-M technology (Dynamic, Reactive, Intelligent Material) fitted throughout.
Product Code: FF3039 for Mons Vest, FF30391 for optional height adjustable waistband
Sizes Available: X-Small, Small, Medium, Large, X-Large
​CE: EN1621-2:2014 Level 2
ULTRA-LITE BACK PROTECTOR
Ultra Lite.jpg
Ultra Lite detail 2.jpg

Features

  • Certified to EN1621-2 Level 1

  • 3D moulding

  • Lightweight

  • Highly flexible

  • Non-restrictive

  • Low profile 19.5mm

  • RPT (Repeat Performance Technology)

  • Adjustable shoulders and waist belt

  • Breathable

  • Super low profile

Designed specifically for winter sports the Ultra-Lite is fully CE approved, lightweight and highly flexible. Using a clever multi layered design of NitrexEvo®, Forcefield’s shock absorbing multi impact material, the back protector 3D moulds to the body shape for ultimate comfort and protection whatever and wherever you are riding!
As with all Forcefield protectors the Ultra-Lite incorporates RPT (Repeat Performance Technology) ensuring continued and consistent protection even after multiple impacts. Fully adjustable waist and shoulder straps ensure optimum fit and comfort. A series of vent channels running through the multiple layers creates excellent breathability.
Product Code: FF1009
Sizes Available: X-Small, Small, Medium, Large
​CE: EN1621-2 Level 1 (Back)

© Forcefield Body Armour is a division of Davies Odell Ltd

Rushden, Northamptonshire, United Kingdom

MIB Horizontal - Left - South East.jpg